---
owner: gmikcon
status: active
last_reviewed: 2026-10-11
review_interval: 180d
confidence: high
source_of_truth: owner-described-and-network-observed
---

# 3D Printers

This document records the known 3D-printing devices in the home infrastructure. Both printers are networked devices with local management surfaces and physical side effects.

## Inventory

### Modified Creality Ender 3 V2 (Klipper)

- Inventory id: `klipper-3d-printer`.
- Base model: Creality Ender 3 V2 (owner-corrected 2026-10-11; previously misrecorded as Ender 2 V3).
- Modification level: deep.
- Controller: Raspberry Pi 3 Model B Rev 1.2, hostname `ender`, user `gmikcon`.
- Firmware/control stack: Klipper `v0.13.0-562-g7a4472649`.
- Network: `home-lan`.
- Address: `192.168.1.102`.
- Management UI: Mainsail at `http://192.168.1.102/`.
- API: Moonraker `v0.10.0-9-g3fbe6ee` (API 1.5.0) at `http://192.168.1.102:7125/`, no authorization required on LAN.
- SSH: `192.168.1.102:22`, credentials not documented.
- Webcam: crowsnest installed.
- Config: `printer.cfg` in Moonraker `config` root; gcodes root holds ~35 gcode files (recent: hatch controller box, cover_ABS, single relay cover top v1.1).

Observed Moonraker status (2026-10-11):

- `klippy_connected`: `true`, `klippy_state`: `ready`.
- Printer state: `standby`, bed 23.0 C, extruder 22.9 C.

### Bambu Lab A1

- Inventory id: `bambulab-a1-3d-printer`.
- Vendor/model: Bambu Lab A1 (model code BBL-P003), serial `03919D581204930` (from TLS certificate CN).
- Network: `home-lan`, address `192.168.1.251`.
- Mode: LAN-only confirmed (cloud ports 21/1883/2025/60000 closed; RTSP 554/322 closed — no RTSP camera stream).
- Local control (verified 2026-10-11):
  - MQTT over TLS on port `8883`, login `bblp` + LAN access code. Publish `device/{serial}/request`, subscribe `device/{serial}/report`. Self-signed BBL CA certificate — client must skip verification.
  - Implicit FTPS on port `990`, login `bblp` + LAN access code. Roots: `model` (factory 3MF samples), `cache` (sliced gcodes and owner projects), `timelapse`, `image`, `logger`, `recorder`, `ipcam`.
- Access code: stored in gnexus-creds, secret title `Bambu Lab A1 (LAN)`. Do not copy the code into this repository.
- Capabilities via MQTT: live status (temperatures, progress, layer), pause/stop/resume, print speed, G-code lines. Starting a new print in LAN mode is done from the printer screen or Bambu Studio; file upload via FTPS.

## Documentation Policy

3D printers are infrastructure-relevant because they are networked devices with local management surfaces and physical side effects.

Document:

- static or reserved IP addresses;
- management UI/API endpoints;
- controller host details for the Klipper printer;
- update and backup procedures for printer configuration;
- whether the device requires internet/cloud access;
- firewall or network-isolation constraints.

Do not document account passwords, API tokens, cloud credentials, or printer access secrets.

## Open Questions

- Whether either printer has a static DHCP lease (both currently observed on DHCP).
- Monitoring/alerting integration (print failed/finished) — planned, not yet configured.
