---
title: gprint
type: host
ip: 192.168.1.131
purpose: NFS network share + S10e Android node host (former 3D-printer brain)
owner: gmikcon
status: active
confidence: 100
last_reviewed: 2026-09-29
review_interval: 90d
source_of_truth: ssh-host
---

# gprint (192.168.1.131)

## Overview
Small physically separate x86_64 server in the home LAN. Formerly the brain
of a 3D printer (Klipper/Moonraker stack) — cleaned up 2026-09-29. Now serves
an NFS network share and hosts the S10e Android Navi node
(see `10-systems/hardware/s10e-navi-node.md`).

## Technical details
- **OS:** Ubuntu 24.04.1 LTS, x86_64, 4 cores, 1.9 GiB RAM
- **Disk:** 13G total, ~6.8G used (57%) after cleanup (was 90%)
- **User:** gprint; SSH and sudo credentials — see gnexus-creds
- **Uptime:** long-lived (46d as of 2026-09-29); kernel update pending reboot — safe to reboot, all services in autostart

## Services
- **NFS share** (ports 111, 2049) — primary role, untouched by cleanup
- **nginx** (port 80) — fluidd site removed; default config
- **iperf3** (port 5201)
- **ssh** (port 22)
- **adb/fastboot/scrcpy** + udev rules (51-android-nexus.rules, vendor 18d1/04e8) — for the S10e node

## S10e node stack (~/pixel3a-work/)
- `s10e.sh` — control script: screen/tap/swipe/text/key/shell/launch/pkgs/info/lock/unlock/reboot/status/scrcpy
- `check.sh` — adb connection status
- `keepalive.sh` + systemd `pixel3a-keepalive.service` (active) — reconnects adb-over-WiFi, re-enables tcpip via USB after phone reboot
- `pixel3a-watch.service` (active) — USB presence watcher (watch.log)
- `pixel3a-setup.service` — disabled, one-shot setup completed 8/8
- `notif-watcher.sh` + systemd `notif-watcher.service` (active, enabled) — polls phone notifications every 10s, new ones appended to `notif.log` (ts|pkg|title|text), dedup in `notif.state`
- `.pin` — phone PIN (chmod 600)
- `README.md` — full node documentation (80 lines, includes Termux + notifications sections)
- TWRP beyond0lte 3.7.0_9-2 at `/home/gprint/twrp-beyond0lte.img` (sha256 verified)

## Termux access (on the S10e)
- SSH from gprint to the phone: `ssh -i ~/.ssh/s10e_key -p 8022 navi@192.168.1.22` (key `~/.ssh/s10e_key`, ed25519 gprint-navi)
- Details and gotchas — see `10-systems/hardware/s10e-navi-node.md`

## Cleanup history (2026-09-29)
- Removed arm-none-eabi cross-compiler (2.4G), trimmed journald to 100M limit
- Klipper/Moonraker remains backed up to `/root/klipper-backup-*.tar.gz`, then removed
- Dead nginx fluidd site removed (nginx -t OK, reloaded); NFS share preserved

## Gotchas
- USB port 1-2 is glitchy (EMI-disable, connect/disconnect cycle) — keep the phone in port 1-3
- scrcpy 1.25: no `--no-audio`/`--time-limit` flags (those are 2.x); headless via `xvfb-run -a scrcpy -s 192.168.1.22:5555 --max-size 800`
- With both USB and Wi-Fi adb connected, always use `adb -s <serial>`
- sudo over non-interactive ssh: `echo <password> | sudo -S <cmd>` (no TTY)
