Newer
Older
gnexus-book / 10-systems / hardware / 3d-printers.md

owner: gmikcon status: active last_reviewed: 2026-10-11 review_interval: 180d confidence: high

source_of_truth: owner-described-and-network-observed

3D Printers

This document records the known 3D-printing devices in the home infrastructure. Both printers are networked devices with local management surfaces and physical side effects.

Inventory

Modified Creality Ender 2 V3 (Klipper)

  • Inventory id: klipper-3d-printer.
  • Base model: Creality Ender 2 V3 (owner-confirmed 2026-10-11; briefly misrecorded as Ender 3 V2 earlier the same day).
  • Modification level: deep.
  • Controller: Raspberry Pi 3 Model B Rev 1.2, hostname ender, user gmikcon.
  • Firmware/control stack: Klipper v0.13.0-562-g7a4472649.
  • Network: home-lan.
  • Address: 192.168.1.102.
  • Management UI: Mainsail at http://192.168.1.102/.
  • API: Moonraker v0.10.0-9-g3fbe6ee (API 1.5.0) at http://192.168.1.102:7125/, no authorization required on LAN.
  • SSH: 192.168.1.102:22, credentials not documented.
  • Webcam: crowsnest installed.
  • Config: printer.cfg in Moonraker config root; gcodes root holds ~35 gcode files (recent: hatch controller box, cover_ABS, single relay cover top v1.1).

Observed Moonraker status (2026-10-11):

  • klippy_connected: true, klippy_state: ready.
  • Printer state: standby, bed 23.0 C, extruder 22.9 C.

Bambu Lab A1

  • Inventory id: bambulab-a1-3d-printer.
  • Vendor/model: Bambu Lab A1 (model code BBL-P003), serial 03919D581204930 (from TLS certificate CN).
  • Network: home-lan, address 192.168.1.251.
  • Mode: LAN-only confirmed (cloud ports 21/1883/2025/60000 closed; RTSP 554/322 closed — no RTSP camera stream).
  • Local control (verified 2026-10-11):
    • MQTT over TLS on port 8883, login bblp + LAN access code. Publish device/{serial}/request, subscribe device/{serial}/report. Self-signed BBL CA certificate — client must skip verification.
    • Implicit FTPS on port 990, login bblp + LAN access code. Roots: model (factory 3MF samples), cache (sliced gcodes and owner projects), timelapse, image, logger, recorder, ipcam.
  • Access code: stored in gnexus-creds, secret title Bambu Lab A1 (LAN). Do not copy the code into this repository.
  • Capabilities via MQTT: live status (temperatures, progress, layer), pause/stop/resume, print speed, G-code lines. Starting a new print in LAN mode is done from the printer screen or Bambu Studio; file upload via FTPS.

Documentation Policy

3D printers are infrastructure-relevant because they are networked devices with local management surfaces and physical side effects.

Document:

  • static or reserved IP addresses;
  • management UI/API endpoints;
  • controller host details for the Klipper printer;
  • update and backup procedures for printer configuration;
  • whether the device requires internet/cloud access;
  • firewall or network-isolation constraints.

Do not document account passwords, API tokens, cloud credentials, or printer access secrets.

Open Questions

  • Whether either printer has a static DHCP lease (both currently observed on DHCP).
  • Monitoring/alerting integration (print failed/finished) — planned, not yet configured.