Handle MCP tool aliases robustly

Clarify knowledge persistence prompts

Integrate proactive knowledge capture into planning and persona ...

- Phase 1 planning: add KNOWLEDGE CAPTURE section to prompt
- Phase 3 planning: add knowledge persistence rule with target selection
- Persona: add "search before save" deduplication instruction
- MCP gnexus-book: add persistence guidance for discovered facts

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Auto-inject relevant memory facts into LLM context on every user turn. ...

Semantic search against the vector memory store runs in parallel with
context provider collection. Number of injected facts scales with
message length (1–3) to reduce noise on short queries. Guardrails:
min length gate, per-turn deduplication, and structured logging at
info level for observability.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Fix ollama_backends / FallbackOllamaBackend issues ...

- registry.py: always use FallbackOllamaBackend (unified backend).
  Enables model priority lists in all deployments, not just multi-server.
- agent.py: add missing think=profile.think_enabled to run() (REST endpoint).
- compressor.py: fix model param type (str → list[str] | str | None).
- fallback.py: harden load_servers_from_file against missing/bad JSON files
  and entries without host. Add clear_blacklists() for manual reset.
- admin.py: add POST /admin/ollama/clear-blacklists endpoint.
- tech_debt_review: document dead stream() methods.
- tests: add tests for single-server fallback, bad file handling,
  missing host skipping, and blacklist clearing.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add deterministic line-based file editing (edit_lines), rating UI fix, and session refresh ...

- filesystem.py: add edit_lines action (deterministic line ops via operations array)
           + numbered param for read (1-based line numbers in output)
           + clarify four editing modes in tool description
- chat.js: fix rating IDs for streaming messages (assign h_ ID on stream_end)
- SessionList.vue: mobile pull-to-refresh with PTR_THRESHOLD=80
- AppSidebar.vue: desktop refresh button next to Conversations header
- planning.py: knowledge source assessment in Phase 1
- debug panel: MCP servers tab + resolved tools per profile
- NAVI.md: reposition as neutral quick-reference

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Inject MCP server instructions into system prompt ...

- McpClient: collect instructions from MCP initialize handshake
- McpServerConfig: add 'instructions' field for Navi-side overlay
- McpManager.get_instructions(): merge server + config instructions
- ContextBuilder: new _mcp_context_msg() injects MCP server
  descriptions into every LLM context as a system message
- Agent passes mcp_manager to ContextBuilder
- mcp_servers.json: add overlay instructions for gnexus-book

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Refactor MCP integration: server groups in profiles ...

- mcp_servers.json: add 'groups' (read/write/admin) for gnexus-book
- AgentProfile: new 'mcp_servers' field (server_name -> group list)
- Profile loader: parse and persist 'mcp_servers' in config.json
- Agent._tool_list(): expands mcp_servers into concrete tool names
  via McpManager.resolve_group(), wildcard '*' supported
- /agents/profiles API: includes 'mcp_servers' in response
- Profiles no longer list individual mcp_ tools in 'enabled_tools'
- discuss: gnexus-book read group
- server_admin: gnexus-book read+write+admin groups

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add MCP server support and fix memory tools user isolation ...

MCP integration:
- New navi/mcp/ package: client, manager, config, tools
- ToolRegistry learns register_external() for MCP tools
- reload_tools reconnects MCP servers on hot reload
- New built-in mcp_status tool
- Startup/shutdown wiring for MCP connections
- 12 new tests (unit + integration with real stdio server)

Memory tools fix:
- memory, memory_save, memory_search, memory_forget now read
  current_user_id from tool context and pass it to MemoryStore
- Fixes invisible facts for authenticated users

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add profile editing to admin panel ...

Backend:
- navi/profiles/loader.py: add save_profile_to_dir() to write config.json
  and system_prompt.txt back to disk
- navi/core/registry.py: add ProfileRegistry.update() for in-memory updates
- navi/api/routes/admin.py: new endpoints GET /admin/profiles/{id} and
  PUT /admin/profiles/{id} for reading and saving full profile config

Admin panel:
- Profiles table: add Edit button per row
- Drawer form with sections: Basic, Model & Generation, Thinking,
  Planning, Sub-agent, Tools, System Prompt
- All fields editable inline (text inputs, checkboxes, textareas for lists)
- Save via PUT request, updates both disk and in-memory registry without
  server restart

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add pagination, search, and sorting to admin sessions ...

Backend:
- Add count_all and search_list abstract methods to SessionStore
- Implement count_all and search_list in PgSessionStore (SQL with ILIKE)
- Implement count_all and search_list in InMemorySessionStore
- Update /admin/sessions to accept limit, offset, search, sort_by, sort_order
- Return {total, limit, offset, items} from /admin/sessions

Frontend:
- Add search input for sessions in admin panel
- Add clickable sortable column headers with asc/desc toggle
- Add pagination controls (prev/next, page size selector, item count)
- Debounce search input (300ms)

Tests:
- Add integration tests for pagination, offset, search, and sorting
- All 217 tests pass

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Propagate user profile to LLM context via current_user_info ContextVar ...

- Extend User model: username, first_name, last_name, phone, birth_date,
  country, city, locale (all from gnexus-auth profile)
- navi_users DDL: add new profile columns
- auth/deps + auth/callback: populate new fields on upsert
- /auth/me: return all profile fields
- Add current_user_info ContextVar for full user profile propagation
- websocket + messages: set current_user_info before agent.run()
- run_ephemeral: inherit and restore current_user_info
- ContextBuilder: _user_context_msg() injects [User context] with name,
  email, location, locale, role into LLM system messages
- _security_policy_msg: reads user_id/role from ContextVar directly

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add multi-user sandbox: filesystem, terminal, code_exec, security policy ...

- filesystem, share_file: sandbox non-admin users to user_data/<user_id>/
- terminal: working_dir sandbox + allowlist + dangerous pattern block for users
- code_exec: sandbox CWD and temp files to user_data/<user_id>/ for users
- context_builder: inject dynamic security policy into LLM context (user/admin)
- config: terminal_user_allowed_commands setting
- agent: wire user_id/user_role through ContextBuilder.build()
- base: add current_user_role ContextVar; run_ephemeral inherits role

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add per-user filesystem sandbox via current_user_id ContextVar ...

- tools/base.py: add current_user_id ContextVar (set by Agent before
  every tool call, cleared after)
- core/agent.py: set current_user_id in run_stream from session.user_id
  and in run_ephemeral from parent_session.user_id; restore in finally
- tools/filesystem.py: _check_path resolves all paths inside
  user_data/<user_id>/ when current_user_id is present; legacy mode
  (no user_id) falls back to FS_ALLOWED_PATHS
- tools/share_file.py: validate source path is inside user sandbox

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Fix NameError in run_ephemeral: session was undefined ...

run_ephemeral doesn't have a session variable. Pass user_id from the
parent session (looked up via parent_session_id) instead of referencing
non-existent session variable.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Fix legacy session visibility and add WebSocket auth debug logging ...

- pg_session_store: remove OR user_id IS NULL from list_all/list_page
  so legacy sessions are no longer visible to all users
- auth/deps.py: add debug logging at every step of _resolve_user
- websocket.py: add debug logging at every stage of websocket_session

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Multi-user auth via gnexus-auth OAuth + hybrid role/permission model ...

- Integrate gnexus-auth-client-py (GAuthClient) for OAuth flow, token refresh,
  and webhook parsing
- Add navi/auth/ package: User model, Fernet encryptor, client singleton,
  deps (get_current_user, require_admin, require_permission)
- New tables: navi_users, user_auth_sessions (auto-created on startup)
- Session/memory isolation by user_id with legacy NULL support
- Cookie-based auth proxy: /auth/login, /callback, /logout, /me
- Webhook receiver /webhooks/gnexus-auth handling user events, global logout,
  session revocation, role/permission changes
- Admin endpoints (/admin/*) gated by role + permissions
- Webclient auth store with isAdmin/hasPermission guards
- Admin-only profile filtering in /agents/profiles
- 200/200 tests passing

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Paginate session list loading

Refine 3D modeler workflow

Simplify 3D SCAD subagent prompt

Disable thinking stalls for 3D subagents

Improve 3D modeling validation prompts

Open artifact links externally on Android

Fix 3D modeling feedback: session context, CORS, and PNG workflow ...

- Embed session_id into the main system prompt so the model reliably
  sees the correct session files directory instead of hallucinating one.
- Add global CORS middleware to fix STL viewer iframe fetch errors.
- Switch modeler_3d PNG previews from content_publish to image_view
  so renders are debug-only for Navi, not user-facing cards.
- Remove literal {session_id} template from persona.txt.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Add 3D modeling profile with model_3d and render_3d tools ...

New profile:
- modeler_3d: 3D model design for 3D printing (OpenSCAD → STL)

New tools:
- model_3d: compile .scad → binary STL via OpenSCAD CLI
- render_3d: render PNG previews from STL (up to 3 views, 400×300)

Both tools return openscad_not_found error if OpenSCAD is not installed.

Docs:
- README.md: add modeler_3d to profile table
- docs/profiles.md: add modeler_3d to active profiles
- docs/tools.md: add model_3d and render_3d to builtin tools
- manuals/model_3d.md, manuals/render_3d.md: full usage manuals
- modeler_3d system_prompt.txt: OpenSCAD-first workflow with dedicated tools

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Improve content publishing UX

Align Ollama HTTP timeout with LLM timeouts

Bootstrap test suite — Phase 1 unit tests ...

- docs/testing.md: testing strategy, mock strategy, phase breakdown
- tests/conftest.py: autouse fixture to reset navi.config.settings per test
- tests/conftest_factory.py: FakeLLMBackend, FakeTool, make_profile, make_registry helpers
- tests/unit/core/test_events.py: wire serialization for all 15 event dataclasses
- tests/unit/core/test_compressor.py: should_compress, partition_messages, format_for_summary, compress_context
- tests/unit/core/test_registry.py: ToolRegistry, ProfileRegistry, BackendRegistry
- tests/unit/core/test_context_builder.py: system prompt caching, persona injection, goal anchor, iteration budget
- tests/unit/profiles/test_base.py: Pydantic model coercion, defaults, extra fields
- navi/core/context_builder.py: use module-level `import navi.config` instead of `from navi.config import settings` so tests can swap the singleton

59 tests passing.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Extract PlanningEngine, ContextBuilder, ToolExecutor from agent.py ...

- navi/core/planning.py: new 3-phase planning pipeline (~390 lines)
- navi/core/context_builder.py: system prompt caching, memory/context injection, goal anchoring (~160 lines)
- navi/core/tool_executor.py: tool execution with middleware chain (~150 lines)
- navi/core/agent.py: reduced from ~1420 to ~770 lines; delegates to extracted classes

All compilation verified.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

Architecture extensibility — event bus, middleware, auto-discovery, Pydantic profiles ...

- EventBus: async pub/sub for AgentEvents, WebSocket subscribes instead of direct yield
- Declarative serialization: AgentEvent.to_wire() on all event types
- Auto-discovery for LLM backends (_discover_backends) and workers (scan navi/workers/*.py)
- AgentProfile: Pydantic BaseModel with extra='allow', @field_validator for model coercion
- Tool middleware chain: pre/post execute hooks via ToolRegistry.add_middleware()
- LoggingMiddleware: built-in, logs every tool call
- Fix pg_trgm DDL: conditional GIN indexes via DO $$ block, no CREATE EXTENSION
- New files: event_bus.py, middleware.py, logging_middleware.py

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>